CONVENTIONAL STEEL DOORS: 

Commercial and Industrial grade 24 and 20 gauge insulated and noninsulated steel doors

1. Hot-dipped galvanized steel roll formed with ribbed panel configuration
2. High Impact Vinyl or Optional Steel Backcovers: Insulated doors
3. Weather tight tongue and groove joint: superior strength and seal
4. Polystyrene Insulation: CFC free
5. 2" thick
6. Heavy gauge end stiles
7. Bottom Astragal

9 Models Available:

OPTIONS: Fimbel Door Corp. offers many special engineering applications and options. Call us for your special requirements.

Glazing Options: Lites will be 24" x 4 " PVC snap together frame with 1/8" acrylic glass. Optional full vision aluminum sections single or dual glazed available. Consult Door Center.

Glazing schedule thru 9'2" 2 lites
12'2" 3 lites
16'2" 4 lites
20'2" 5 lites
24'2" 6 lites

Weatherstrip: Weatherstrip package consists of an EPDM flexible head seal, heavy duty bottom astragal and joint seals.  Jamb seals are optional

Hardware: All door hardware is heavy duty and galvanized.  Rollers are 10 ball bearing 2" for 2" track (3" for 3" track)

Track:  2" track is a minimum of 14 gauge, and can be bracket mounted or optionally available with 4-1/4" x 2-1/2" continuous angle. Note: all tracks should be designed to clear the maximum height off the floor, consult factory for information.

COUNTERBALANCE: Oil-tempered helical wound torsion springs mounted on a steel shaft with a minimum of 10,000 cycles.  Extra high cycle torsion springs available.  Extension springs are also available. Consult factory for information.

Lock: Lock to be interior mounted slide lock (optional keyed cylinder lock available).

Operation: All Doors are designed for manual push up operation, optional chain hoist or motorized operators are available. Consult factory for proper sizing of motor operators.  Fimbel Door Corp. sells LiftMaster line of electric door operators. 

Commercial Warranty

Specifications although accurate at time of printing are subject to change without notice.